img-product
img-product
img-product
img-product
img-product
img-product
img-product
img-product
img-product

BOB57 O3 / Vista Cinematic 6S HD

BNF Copters

Brandasd
Version

6S

Frame Design

X-Frame

Size

6"

Style

Longrange

VTX

DJI O3 Air Unit

Weight

620g

The iFlight BOB57 is a specialized 6-inch cinematic drone optimized for "Mountain Surfing" and high-speed proximity flying. Its signature H-shaped frame and Gladiator shell provide a sleek, aerodynamic profile that protects your electronics from dust and moisture. Powered by custom XING2 2506 motors, it delivers a unique flight feel that is incredibly smooth for cinematic shots while retaining enough "pop" for aggressive freestyle maneuvers.

🎬

Product Description

The iFlight BOB57 O3 / Vista Cinematic 6S HD is a unique "hybrid" drone designed in collaboration with renowned pilot and videographer Ellis van Jason. It is specifically engineered to bridge the gap between a 5-inch freestyle drone and a 7-inch long-range explorer, offering the agility of the former with the flight time and stability of the latter.

  • The "Best of Both Worlds": The 6-inch propeller size is the secret to the BOB57. It provides more efficiency and "hang time" than a 5-inch drone, making it easier to cruise at long distances, but it remains much more agile and "flippable" than a heavy 7-inch rig.

  • H-Frame with "Gladiator" Shell: The H-geometry ensures that even with wide-angle cinematic lenses, your propellers remain out of view. The protective "Gladiator" canopy adds a layer of defense against the elements and helps with the drone's aerodynamics.

  • Custom XING2 2506 Motors: These motors are specifically sized for 6-inch props. They provide high torque for pulling out of dives at high altitudes while remaining efficient during low-throttle cruising.

  • Front-Mounted XT60: Unlike most drones where the battery lead is in the rear, the BOB57 features a front-mounted XT60. This keeps the cable away from the rear props and allows for a larger battery to be seated further back on the "backbone" for perfect center-of-gravity.

  • High-End GPS & Reliability: Designed for "proximity long-range," it comes with a high-end GPS pre-installed for reliable rescue modes. The ESC also features built-in spike absorbers and extra capacitors to handle the high-voltage demands of mountain flying.

  • Integrated GoPro Power: The drone features a built-in BEC and a USB-C/Balance plug lead, allowing you to power your GoPro directly from the flight battery, saving weight and simplifying your setup.

Technical Specifications:

  • Wheelbase: 280mm

  • Motors: XING2 2506 1500KV (Optimized for 6S)

  • FC & ESC: BLITZ F722 FC & BLITZ E55 55A 4-in-1 ESC

  • Video System: DJI O3 Air Unit or Nebula Pro Vista (depending on version)

  • Propellers: Gemfan 6032-3 (Tri-blade)

  • Weight: ~580g (without battery)

  • Max Speed: 180 km/h

  • Flight Time: 9 mins (1800mAh 6S) / 15+ mins (4000mAh 6S Li-ion)

The Pilot's Reality Check:

  • The "Ellis van Jason" Tune: This drone comes with a specialized tune from Ellis himself. It is designed to feel "heavy" and stable, much like a cinematic camera plane, rather than the "twitchy" feel of a racing drone.

  • Proximity Specialist: This is the drone you want if you plan on flying down the side of a mountain or chasing a car through a winding road. It feels "locked-in" even in turbulent air.

📦 Package contains
  • 1 * iFlight BOB57 Cinematic 6S HD BNF

  • 2 * Albatross LHCP 5.8GHz SMA Antennas

  • 2 * Sets of Gemfan 6032-3 Propellers (4 Pairs)

  • 2 iFlight Lipo Straps (20250mm)

  • 2 * Battery Silicone Anti-slip Pads

  • 1 * USB Type-C 5V Balance Plug Power Cable (for GoPro)

  • 1 * TPU GoPro Mount Base

  • 1 * Hardware & Screw Pack

🤔 Frequently Asked Questions
  • Why a 6-inch propeller instead of 5 or 7?

    The 6-inch platform is the "sweet spot" for cinematic pilots. It offers more "hang time" and stability in the air than a 5-inch, which is great for smooth mountain surfing, but it remains much more agile and easier to recover from dives than a heavy 7-inch drone.

  • What is the benefit of the "H-Frame" geometry?

    The BOB57 uses an H-shaped frame with a robust middle section. This design pushes the front propellers further apart and away from the camera, ensuring that you have a clean, propeller-free view in your DJI O3 or Vista HD feed, even at lower camera angles.

  • What is the "Gladiator Shell"?

    The drone features a protective outer shell (canopy) that covers the electronics. This shell is designed to protect your stack and VTX from dust, grass, and water droplets, making it more reliable for flying in varying outdoor conditions.

  • Why is the XT60 connector in the front?

    Most FPV drones have the battery lead in the back. By moving the XT60 to the front, iFlight cleared up the entire "backbone" of the drone. This allows you to fit much larger batteries (up to 3000mAh 6S LiPo or 4000mAh+ Li-ion) without them interfering with your GoPro or antennas.

  • Does it have a built-in GoPro power solution?

    Yes. The BOB57 includes a built-in BEC (Battery Eliminator Circuit) and a dedicated power cable. This allows you to power your GoPro directly from the flight battery, saving you the weight of a GoPro battery and preventing the camera from dying mid-flight.

Product Attributes
Version

6S

Signal

Digital

Frame Design

X-Frame

RX

ELRS, PNP, TBS Crossfire

Size

6"

Style

Longrange

VTX

DJI O3 Air Unit

Weight

620g


VERIFIED PARTNERS

Many of our partners are verified by the manufacturers

SECURE PAYMENT

Our partners provide various verified payment methods

FAST SHIPPING

Fast handover to the shipping service within 24 hours with many partners

GROWING COMMUNITY

FPV is enjoying growing enthusiasm all over the world