GEPRC Cinebot25 HD O3 Quadcopter

The GEPRC Cinebot25 HD O3 is a specialized 2.5-inch cinewhoop that redefines the "push-to-start" cinematic experience. While the Cinelog series focuses on raw performance, the Cinebot25 is built with a revolutionary one-piece injection-molded frame and a sophisticated camera damping system designed to make O3 footage look like it was shot on a mechanical gimbal.

• Integrated Protective Design: The entire lower structure is a single injection-molded piece made from a new "modified material" that balances rigidity with flexibility. This makes the drone incredibly durable for indoor collisions while protecting the propellers and your surroundings.

• Revolutionary Camera Damping: The O3 camera is suspended by four silicone damping balls. This mechanical isolation filters out high-frequency motor vibrations before they reach the lens, ensuring "jello-free" video and allowing DJI's RockSteady to perform at its peak.

• Convenient "External" Access: GEPRC designed the frame with a dedicated cutout for the SD card slot and USB-C port on the O3 Air Unit. You no longer have to disassemble the frame just to retrieve your 4K footage or update firmware.

• High-Torque Power System: The regular version uses SPEEDX2 1404 4600KV motors, while the "S" (Sport) version steps up to 1505 4300KV motors. Both are optimized for the 4S battery system to provide the "pop" needed to recover from dives while carrying an external Naked GoPro.

• Advanced G4 AIO: The TAKER G4 flight controller offers more processing headroom than older F7 chips, resulting in a more "connected" feel and better performance in wind or complex indoor air currents.

Technical Specifications:

• Wheelbase: 115mm

• FC & ESC: TAKER G4 45A AIO

• MCU: STM32G473CEU6

• Gyro: ICM 42688-P

• Motors: SPEEDX2 1404 4600KV (Regular) / 1505 4300KV (S Version)

• Propellers: HQProp DT63mm x4

• Video System: DJI O3 Air Unit

• Recommended Battery: 4S 660mAh – 850mAh (XT30)

• Weight: ~182g (Regular) / ~193g (S Version)

• Flight Time: 5–8 minutes

Pilot's Reality Check:

• The Weight Sweet Spot: At roughly 182g–193g (dry), this drone sits right in the "goldilocks" zone. It has enough mass to feel stable in a breeze but is light enough to be safe for indoor flights near people or furniture.

• Battery Orientation: It supports multiple battery mounting methods (aluminum components or straps), allowing you to fly "toilet tank" style for better center-of-gravity during freestyle maneuvers.

• Quiet Operation: The 2.5-inch 4-blade props are designed for lower noise. It is significantly quieter than 3-inch whoops, making it much less intimidating for real estate work or public settings.

Flyer's POV: Flying the Cinebot25 feels "smooth as silk." It lacks the aggressive "screaming" noise of smaller quads and moves with a deliberate, cinematic grace. The dampening system is the star here—you can actually feel how much work it's doing to keep the image stable during punch-outs. It's a confidence-inspiring machine that bridges the gap between a toy-grade drone and a professional cinema rig.

• 1 * Cinebot25 HD O3 Quadcopter (Pre-built & Tuned)

• 1 * HQprop DT63mmx4 Propeller (Full Set)

• 2 * Battery Anti-slip Pads

• 1 * 15x150mm Battery Strap

• 1 * 15x180mm Battery Strap

• 1 * Naked GoPro Base Mount

• 1 * DJI O3 Heat Sink

• 1 * Reserved Screw Pack (Includes camera damping balls, nuts, and various M2/M1.6 screws)

• 1 * L-shaped 1.5mm Screwdriver

• 1 * Frequency Pairing Pointer

• 1 * Damping Ball Puncher