Many of our partners are verified by the manufacturers

| Version | 6S |
|---|---|
| Frame Design | X-Frame |
| Size | 3.5" |
| Style | Cinewhoop |
| VTX | DJI O3 Air Unit |
| Weight | 285g |


The GEPRC CineLog35 V2 HD O3 is arguably the most polished 3.5-inch cinewhoop on the market. It takes the success of the original CineLog35 and adds structural reinforcements, improved dampening for the O3 camera, and a more aggressive 6S power system to handle full-sized action cameras with ease.
O3 Anti-Resonance Gimbal: The V2 features an independent under-hanging shock absorption gimbal for the O3 camera. This specifically targets the IMU resonance issues common in the O3 system, ensuring your stabilized footage (RockSteady/GyroFlow) is buttery smooth.
Reinforced 7075 Structure: The main carbon plate and injection-molded guards are connected via 7075 aluminum columns, significantly increasing rigidity and crash durability compared to the V1.
Integrated O3 Access: The prop guards are designed with built-in cutouts for easy access to the O3 Air Unit's SD card slot and USB-C port, a massive quality-of-life improvement for data management.
Aggressive 6S Power: Running on 6S LiPo batteries with 2650KV motors, this drone has enough "grunt" to carry a full-sized GoPro Hero 12 without feeling sluggish or "bobbing" in the air.
Hard-Mounted XT60: The power connector is integrated directly into the carbon plate. This prevents the battery lead from ever getting chopped by the props and allows for easy one-handed battery plugging.
Technical Specifications:
Wheelbase: 142mm
FC System: GEP-F722-45A AIO V2
Motors: SPEEDX2 2105.5-2650KV (6S Version)
Propellers: HQProp D-T90MM 3-Blade
VTX & Camera: DJI O3 Air Unit (4K/60fps)
Weight: ~285g (without battery)
Recommended Battery: 6S 1050mAh–1300mAh LiPo
GPS: GEP-M10 (Included in most V2 configurations)
Pilot's Reality Check:
Noise Profile: While quieter than a traditional 5-inch drone, the CineLog35 V2 is still quite loud due to the high-KV motors and 3.5-inch prop ducts. It is "safe" to fly near people, but it is not "silent."
Weight Sensitivity: With a 6S 1300mAh battery and a full GoPro, the drone starts to get heavy. Your flight times will drop to around 4–5 minutes if you are flying aggressively or in windy conditions.
Flyer's POV: Flying the CineLog35 V2 feels "locked in" like a much larger freestyle drone. It doesn't have the typical "whoop wash" or floaty feeling when descending through its own air. Because of the extra power, you can actually perform basic freestyle maneuvers (power loops and split-S) that smaller cinewhoops struggle with. It’s a confidence-inspiring tool that allows you to get close to subjects knowing the ducts protect everyone and the camera gimbal protects the shot.
1 * CineLog35 V2 HD O3 Drone
2 * HQProp D-T90MM (2 Pairs)
2 M20250mm Battery Straps
2 * Battery Silicone Pads
1 * Set of Spare Screws & Hardware
1 * L-shaped Screwdriver Set (1.5mm, 2mm, 3mm)
1 * M5 Wrench & Plastic Tweezers
1 * GoPro Mounting Base (Full & Naked versions)
1 * Antenna Fixed Tube (Pair)
1 * Keychain
| Version | 6S |
|---|---|
| GPS | GPS |
| Signal | Digital |
| Frame Design | X-Frame |
| RX | ELRS, PNP, TBS Crossfire |
| Size | 3.5" |
| Style | Cinewhoop |
| VTX | DJI O3 Air Unit |
| Weight | 285g |