GEPRC Crown HD 3 Zoll DJI FPV Cinewhoop PNP 4S

Name: GEPRC Crown HD 3 Zoll DJI FPV Cinewhoop PNP 4S
Brand: GEPRC
Price: 419.99 USD
Availability: InStock

BNF Copters

Best Price

$422.02

Brand

Version	4S
Frame Design	X-Frame
Size	3"
Style	Cinewhoop

The GEPRC Crown HD is a heavy-duty 3-inch Cinewhoop designed for ultra-smooth HD filming. Featuring a unique large-mouth intake duct design and a shock-absorbing frame, it provides the stable, high-pressure thrust needed to carry a full-sized GoPro with zero propeller interference and minimal vibration.

Prices & Deals

Affiliate

Shipped from: DE

Affiliate

PNP
Frsky RXSR
TBS Nano RX
4S
6S

Shipped from: CN

Product Description

The GEPRC Crown HD is a high-performance 3-inch Cinewhoop that was specifically engineered to tackle the "jello" issues often found in HD video. It uses a unique ducted design that prioritizes air pressure and smooth cinematic flight over raw freestyle speed.

Innovative Duct Design: Unlike standard thin-walled ducts, the Crown uses a specialized wide-mouth design that increases air intake efficiency. This creates a high-pressure air cushion around the propellers, which translates to smoother low-speed handling and better weight-carrying capability.
Complex Structural Damping: The frame is built with a sophisticated vibration-damping system. By isolating the flight stack and camera from the motors, GEPRC has virtually eliminated high-frequency oscillations, ensuring your DJI FPV feed and action cam footage are "jello-free."
Optimized 4S Power System: This PNP version is tuned for 4S voltage, utilizing 1408 3500KV motors. This setup provides a linear throttle curve that is perfect for precise indoor maneuvering and steady outdoor cinematic tracking.
DJI FPV HD Integration: Equipped with the full DJI FPV Air Unit, the Crown HD delivers a 720p/120fps live feed with onboard 1080p recording capability. The frame is designed to protect the Air Unit and its antennas while maintaining enough airflow to prevent overheating.

Technical Specifications:

Frame: GEP-CW3
Wheelbase: 156mm
FC: SPAN F722 HD
ESC: BLHeli_S 45A 4-in-1
Motors: GEP-GR1408 3500KV (4S)
VTX & Camera: DJI FPV Air Unit
Propellers: Gemfan 3045-3
Weight: ~299g (without battery)
Battery Connector: XT60
Recommended Battery: 4S 1300mAh - 1550mAh

The Pilot's Reality Check:

Propeller Noise: The "large-mouth" ducts are excellent for thrust but can be quite loud compared to open-prop drones. The sound is a lower-pitched hum rather than a high-pitched scream, which is often easier to mask in video editing.
Weight Management: At nearly 300g dry, adding a 1550mAh 4S battery and a GoPro puts this drone well over the 500g mark. It has a significant amount of inertia; remember to "give it the gas" early when pulling out of a descent.

📦 Package contains

1 * GEPRC Crown HD 3" Cinewhoop (4S PNP)
4 * Gemfan 3045-3 Propellers (2 pairs)
2 * Battery Straps (M15x250mm)
2 * Battery Silicone Non-slip Pads
1 * TPU Camera Mount (for GoPro)
1 * Set of Spare Screws & Hardware
1 * 1.5mm L-shaped Wrench

🤔 Frequently Asked Questions

What does "PNP" mean for this drone?
"PNP" stands for Plug-and-Play. This means the drone comes with all the electronics (motors, ESC, flight controller, and DJI HD system) pre-installed, but it does not include a radio receiver. You will need to install your own receiver (like ELRS or Crossfire) or bind it directly to the DJI FPV Remote Controller (V1) if using the built-in receiver in the DJI Vista unit.
Is the 4S version powerful enough for a GoPro?
Yes. The 4S version uses 1408 3500KV motors which are optimized for the higher RPMs needed by 4S batteries. It is designed to carry a full-sized GoPro Hero 8/9/10/11 or a "Naked" GoPro. With a standard GoPro, you can expect a very stable "locked-in" flight feel, though it won't be as punchy as a 6S racing drone.
Why is the frame described as "more efficient"?
GEPRC redesigned the air inlet and outlet on the ducts. By making the air intake larger than the outlet, they created a "propeller-matching" flow field. This "asjalik" design makes the motors work more efficiently, which translates to longer flight times (up to 10 minutes without a camera) and a much deeper, less annoying sound profile.
How durable is the CNC aluminum camera mount?
The camera is protected by 7075-T6 aluminum alloy plates. Unlike 3D printed mounts that can snap or wobble, this CNC mount is rigid and "elegant." It not only protects your expensive Caddx Nebula Pro/Polar camera but also acts as a heat sink for the VTX, helping to prevent overheating during long setup times on the ground.
What happens if I crash into a wall?
The Crown is surrounded by thick EVA protection guards. These are high-density foam "bumpers" that absorb the energy of an impact. Because the frame is a "separate type" design (the bottom plate is independent of the guards), you can usually just replace a scuffed foam guard rather than having to rebuild the entire drone.