GEPRC Mark5 HD

The GEPRC Mark5 HD is widely considered a landmark in the FPV world. It was one of the first "Bind-and-Fly" drones to truly rival custom-built racing rigs in terms of performance and structural design, featuring the distinctive "Shock Absorbing Structure" for the camera.

• Aluminum CNC Camera Cage: The Mark5 features high-strength 7075 aluminum alloy side plates. This "cage" not only protects the expensive HD camera but also acts as a heat sink and provides a rock-solid mounting point that eliminates high-frequency vibrations.

• Innovative Shock Absorption: GEPRC developed a dedicated vibration-damping structure behind the camera mount. This helps isolate the digital VTX and camera from the motors, ensuring your HD footage remains buttery smooth and free of "jello" even on older, bent propellers.

• Independent ESC/FC Stack: The frame design separates the electronics into a clean, accessible stack. This improves airflow for cooling and makes it much easier to perform repairs or swap out components compared to tighter, more compact frames.

• XING-Style Power: Usually equipped with high-performance SPEEDX2 2107.5 motors, the Mark5 offers an incredible power-to-weight ratio. It is designed to handle 6S voltage for maximum "pop" and minimal voltage sag during demanding freestyle tricks.

Technical Specifications:

• Frame: GEP-MK5

• Wheelbase: 225mm

• FC: SPAN F722-BT-HD V2

• ESC: SPAN G50A BLHeli_32 4-in-1

• Motors: SPEEDX2 2107.5 1960KV (6S) / 2450KV (4S)

• VTX & Camera: DJI FPV Air Unit / Caddx Vista / DJI O3

• Propellers: HQProp Ethix S5

• Weight: ~390g (without battery)

• Battery Connector: XT60

• Recommended Battery: 6S 1300mAh - 1550mAh

The Pilot's Reality Check:

• The "Freestyle" Feel: Unlike the "DeadCat" version, the standard Mark5 HD has a "Squashed-X" geometry. This makes the drone feel incredibly balanced and symmetrical in its flips and rolls, which is why it's a favorite for pure freestyle pilots.

• Propellers in View: Because this is a freestyle-first frame, you may see the tips of your propellers in your HD feed depending on your camera tilt. If you want 100% "prop-free" cinematic footage, look at the "DC" (DeadCat) version instead.

• 1 * GEPRC Mark5 HD Drone

• 2 * Pairs of HQProp Ethix S5 Propellers

• 1 * Battery Strap (M20x250mm)

• 1 * Battery Strap (M20x220mm)

• 2 * Battery Silicone Non-slip Pads

• 1 * Set of 3D Printed Parts (Antenna/GoPro mounts)

• 1 * Carbon Fiber Top Plate Hardware Set

• 1 * Screwdriver / Wrench Tool Set