Many of our partners are verified by the manufacturers

| Version | 6S |
|---|---|
| Frame Design | Deadcat |
| Size | 7" |
| Style | Freestyle, Longrange |
| VTX | DJI O3 Air Unit |
| Weight | 652g |
The iFlight AOS 7 EVO O3 6S HD is the big brother of the AOS line, scaling up Chris Rosser's resonance-tuned philosophy to a 7-inch platform. It is a rare machine that manages to feel as sharp and responsive as a 5-inch freestyle quad while offering the flight times and stability required for extreme long-range exploration.
Scientific Resonance Suppression: The AOS 7 frame is designed using finite element analysis to push arm resonances above the typical motor noise band. This results in "gyro-clean" data, allowing you to fly with an aggressive tune that feels incredibly "connected" to your sticks.
Truss-Design Arms: The interlocking 8mm carbon struts provide immense torsional stiffness. This rigidity is what gives the AOS 7 its unique ability to snap through rolls and flips without the "prop wash" or wobbling common in other 7-inch frames.
Ultimate O3 Protection: The CNC-machined 7075 aluminum camera cage acts as a roll cage for your O3 camera. It includes integrated soft mounts that specifically target the O3's sensitive IMU to ensure crystal-clear 4K footage.
Massive Power Plant: The XING 2806.5 1300KV motors are optimized for 6S voltage, providing the massive torque needed to drive 7-inch props efficiently during long cruises while still having enough "punch" for vertical dives.
Integrated GPS & Beeper: Comes standard with the GEP-M10 GPS for full Return-to-Home (RTH) security and an autonomous beeper to help locate the drone in tall grass if you go down far from home.
Technical Specifications:
Wheelbase: 293mm
Weight (Takeoff): Approx. 652g (without battery)
FC & ESC: BLITZ F722 FC + BLITZ E55 55A 4-in-1 ESC
Motors: XING 2806.5 1300KV
Propellers: GemFan 7040 3-Blade
Video System: DJI O3 Air Unit (4K/60fps)
Max Speed: 140 km/h (Manual Mode)
Max Hover Time: ~30 mins (with 6S 2P 8000mAh Li-Ion)
GNSS: GPS+Galileo+Glonass
Pilot's Reality Check:
Antenna Setup: Because the O3 antennas are mounted at the rear, you must be mindful of your orientation during long-range flights. If you point the "butt" of the drone toward yourself, the carbon frame and battery can block the signal. It is best to fly with a slight offset or upgrade to longer antennas.
Battery Straps: This frame is designed to hold large, heavy batteries. While it has slots for three straps, iFlight usually only includes two. For heavy 8000mAh Li-Ion packs, adding a third strap is highly recommended to prevent the battery from ejecting in a hard landing.
Flyer's POV: Flying the AOS 7 EVO is a "transcendental" experience for long-range pilots. It doesn't feel like you're piloting a heavy boat; it feels like a 5-inch drone that has been magically granted infinite hang time. You can cruise silently over a mountain peak and then, on the way down, pull a massive power loop or a snappy snap-roll that would snap the arms off a lesser 7-inch frame. It is the perfect hybrid for someone who wants to do "freestyle long-range."
1 * AOS 7 EVO V1.2 6S HD BNF (Pre-built & Tuned)
2 * Albatross LHCP 5.8GHz Antennas
2 * GemFan 7040 Propeller (Pairs)
2 Battery Straps (20250mm)
1 * TPU Parts & GPS Mount (Pre-installed)
1 * Screw Bag (Spare Hardware)
| Version | 6S |
|---|---|
| Signal | Digital |
| Frame Design | Deadcat |
| RX | DJI O3 Air Unit, ELRS, PNP, TBS Crossfire |
| Size | 7" |
| Style | Freestyle, Longrange |
| VTX | DJI O3 Air Unit |
| Weight | 652g |