Soldering Iron TS100 – Portable + Display 1
Soldering Iron TS100 – Portable + Display 2
Soldering Iron TS100 – Portable + Display 3
Soldering Iron TS100 – Portable + Display 4

Soldering Iron TS100 – Portable + Display

Soldering Irons

Best Price
$87.83
The Miniware TS100 is a compact, programmable soldering iron that fits the power of a desktop station into the size of a fountain pen. It features a bright OLED display, precise temperature control up to 400°C, and a DC5525 power port. Renowned for its rapid 11-second heat-up time (at 24V), it is the go-to choice for pilots who need a reliable tool for field repairs that can be powered directly from a 3S-6S LiPo battery.

Product Description

The Miniware TS100 is the iconic "smart" soldering iron that revolutionized portable electronics repair. While the TS101 is the newer model, the original TS100 remains a favorite for its ultra-slim profile and legendary performance within the FPV and RC communities.

  • Proven Performance: Despite its small 33g frame, the TS100 delivers up to 65W of power. Its internal STM32 chip and dual temperature sensors ensure that the tip temperature remains stable even when soldering large, heat-wicking battery connectors.

  • Intelligent Motion Sensing: Like a modern smartphone, the TS100 has a built-in accelerometer. It automatically enters "Sleep Mode" when idle to preserve the tip and save energy, waking up the instant you pick it up to resume work.

  • OLED Visual Interface: The built-in screen provides clear, real-time feedback on temperature and system status. It also allows you to navigate the parameter menus to adjust sleep timers, temperature steps, and low-voltage protection limits.

  • Micro USB Programming: On the rear of the iron is a Micro USB port. By connecting it to a PC, you can customize the boot logo and edit the configuration file to tailor the iron's behavior to your specific needs.

  • Open Source Community: The TS100 has a massive following. Many pilots install community-developed firmware like Ralim's IronOS, which adds advanced features like a battery level indicator, more precise power curves, and left/right-hand screen orientation.

Technical Specifications:

  • Power: 65W (at 24V)

  • Temperature Range: 100°C – 400°C (Stability: ±2%)

  • Input Voltage: DC 12V – 24V (Standard DC5525 Jack)

  • Heat-up Time: ~11s (at 24V) / ~40s (at 12V)

  • Length: 168mm (with tip)

  • Weight: 33g (Controller + Tip)

The Pilot's Reality Check:

  • The "Magic" of 24V: While it can run on a 3S LiPo (12V), the TS100 truly shines on 24V (6S LiPo). At higher voltages, it heats up significantly faster and recovers temperature much more efficiently during heavy soldering.

  • Ergonomics: The handle is very slim. If you have large hands, you may find the newer TS101 or the use of a 3D-printed sleeve slightly more comfortable for long building sessions.


📦 Package contains
  • 1 * TS100 Soldering Iron Controller

  • 1 * Soldering Tip (Standard TS-B2 or BC2 depending on bundle)

  • 1 * Allen Key (For tip replacement)

  • 2 * Spare Locking Screws

  • 1 * User Manual

  • (Note: Power supply and XT60 cable are often sold separately or included in specific "Full Kits")


Product Attributes

🤔 FAQ: Frequently Asked Questions
  • How fast does it heat up?

    The speed depends entirely on your power source. At the maximum 24V (65W), the TS100 can reach 300°C in just 11 seconds. At 12V (17W), it takes about 40 seconds. Because it uses "direct drive" cartridge tips where the heating element is integrated into the tip itself, it is much more efficient than traditional irons.

  • Can I power it with a drone battery?

    Yes, this is its most popular use case. The iron has a DC5525 barrel jack (4$5.5$mm outer, 5$2.5$mm inner diameter) that accepts 12V to 24V.6 You can use an XT60-to-DC5525 cable to power it directly from a 3S, 4S, or 6S LiPo battery, making it the perfect tool for field repairs.

  • Does it have safety features?

    Yes. It features a built-in accelerometer that detects when the iron is in use. If left idle, it will enter Sleep Mode (dropping to 200°C) and eventually Standby Mode (turning off completely). It also features "anti-static" construction and a dedicated grounding screw for working on sensitive components.

  • What is the "Custom Firmware" everyone talks about?

    The TS100 is open-source. Many users replace the factory software with "Ralim" (IronOS) firmware via the Micro-USB port. This custom software adds features like a more detailed home screen, battery voltage monitoring (to prevent over-discharging LiPos), and even the ability to play a simple version of Tetris on the small screen.

  • How does it compare to the TS101?

    The TS100 is slightly smaller and slimmer than the TS101. However, it lacks the TS101’s USB-C power input and "Boost" button. The TS100 also uses a Micro-USB port for data, whereas the newer model has moved to USB-C.


VERIFIED PARTNERS

Many of our partners are verified by the manufacturers

SECURE PAYMENT

Our partners provide various verified payment methods

FAST SHIPPING

Fast handover to the shipping service within 24 hours with many partners

GROWING COMMUNITY

FPV is enjoying growing enthusiasm all over the world