Many of our partners are verified by the manufacturers

Caddx Peanut Action Cameras Version 1.0 (Insta360 Powered) Style Miniature / Micro Action Cam
The Caddx Peanut solves the biggest problem with the original Insta360 GO 2: the internal battery. While it has its own small battery, it is designed to be hard-wired to your drone’s power, allowing for "infinite" recording time as long as your quad is plugged in.
FlowState Stabilization: It uses Insta360’s industry-leading stabilization. Even on a shaky, high-vibration drone, the footage comes out looking like it was shot on a gimbal.
Remote Control Recording: Unlike standard action cams, you can wire the Peanut to your flight controller. This lets you start and stop recording via a switch on your radio transmitter.
Tougher Build: Caddx added a reinforced power connector and a built-in ND filter mount. These additions make it more "flight-ready" than a standard consumer camera that might break during a hard landing.
4-Pin Power Connector: The external power step-down module allows the camera to run on 2S to 6S voltage, meaning it can be used on almost any FPV quad in your fleet.
Weight: 27g
Resolution: 2.5K @ 50fps / 1080p @ 50fps
Aperture: f/2.2
Storage: 32GB (Internal)
Video Format: MP4 (In-camera) / INSV (via App)
Input Voltage: 5V (or 2S-6S with included step-down buck)
ISO Range: 100-3200
Dimensions: 52mm x 24mm x 21mm
Overheating: Because it's so small and lacks a big heat sink, the Peanut needs airflow. If you leave it recording while your drone is sitting on the bench, it will overheat and shut down within a few minutes.
Prop Wash/Jello: While FlowState is amazing, if your drone has massive mechanical vibrations (bad props or loose motors), you might still see some "jello" in the footage. ND filters are highly recommended to help hide this.
App Dependency: To get the best stabilized footage, you still need to process the files through the Insta360 App or Studio software. It's not quite "plug-and-play" if you want the professional look.
1 * Caddx Peanut Camera
1 * Power Step-down Module (2S-6S Buck)
1 * Power Cable (4-pin to flight controller)
1 * USB Adapter / Charging Cable
1 * ND8 Filter
1 * ND16 Filter
1 * Set of Mounting Screws and Nuts
1 * User Manual