RunCam Thumb 1080HD FPV

Name: RunCam Thumb 1080HD FPV
Brand: Runcam
Availability: OutOfStock

Actioncams

Best Price

$76.10

The RunCam Thumb is an ultra-lightweight 1080p action camera designed for micro FPV drones. Weighing only 9.8g, it allows even the smallest "Tiny Whoops" to capture stabilized high-definition footage. With integrated Gyroflow support, it transforms shaky micro-drone flights into smooth, cinematic masterpieces without sacrificing flight performance.

Prices & Deals

Product Description

The RunCam Thumb is one of the smallest and lightest 1080p HD cameras ever made for the FPV community. It was designed specifically for "Micro" drones and "Tiny Whoops" that are too small to carry a GoPro, weighing only about as much as a standard AAA battery.

9.8g Ultra-Lightweight: The Thumb is stripped of all non-essential weight. It has no internal battery, making it light enough to be mounted on 1S or 2S micro drones (like a Mobula7 or Babyhawk) without significantly affecting their flight time or agility.
Gyroflow Stabilization: While the raw footage might look shaky on a micro drone, the Thumb records internal gyroscope data. When you run your video through the free Gyroflow software, it uses that data to perfectly stabilize the footage, rivaling the smoothness of much larger cameras.
1080P 60FPS Performance: It captures crisp 1080p video at 60 frames per second. This is the "sweet spot" for FPV, providing smooth motion blur and high enough resolution for social media sharing and digital archives.
Replaceable ND Filter: To achieve that "cinematic" look in bright sunlight, the Thumb features a detachable lens protector that can be swapped for ND filters. This allows you to lock your shutter speed and get natural-looking motion blur.

Technical Specifications:

Resolution: 1080P @ 60FPS
Video Format: MP4
Gyro: Built-in (Supports Gyroflow)
Communication Interface: Micro USB
Storage: Micro SD Card (up to 128G, Class 10/UHS-I/UHS-III)
Power Input: 5V (requires soldering to the drone's FC or using a balance lead)
Dimensions: 52mm 13mm 21mm
Weight: 9.8g

The Pilot's Reality Check:

No Internal Battery: You must power this camera from your drone's 5V pads or a 5V BEC. If your drone crashes and the battery ejects, the camera will lose power and potentially corrupt the last video file unless you use a "clean shutdown" capacitor.
Indoor Lighting: Because it has a small sensor, it performs best in well-lit outdoor environments. In low-light indoor settings, you may notice some digital noise in the footage.

📦 Package contains

1 * RunCam Thumb Camera
1 * Standard TPU Mount (fixed angle)
1 * 2-Pin Power Cable (for soldering to Flight Controller)
1 * Set of Spare Screws
1 * Transparent Lens Protector (pre-installed)
1 * Micro USB Cable (for data transfer/settings)

🤔 Frequently Asked Questions

How can it be so light (9.8g)?
The RunCam Thumb achieves its featherweight status by removing everything non-essential. It has no internal battery, no screen, and no heavy glass housing. It is designed to be powered directly by your drone's 5V rail. This makes it light enough to mount on a 1S Tiny Whoop without completely killing the flight performance.
Is 1080p enough for good FPV footage?
While it won't compete with a 4K GoPro, it records at 1080p/60fps, which is perfect for social media and YouTube. The "smart" part is that it includes a built-in gyroscope. This means you can run your "shaky" raw footage through Gyroflow (free software) to get buttery smooth, professional-looking cinematic results that look much better than the resolution suggests.
How do I power it since it has no battery?
It comes with a 2-pin 5V connector.6 You solder the included cable to a 5V and Ground pad on your drone's flight controller.7 It draws very little power (8$280$mA), so it won't overheat your electronics.9 Once you plug in your drone battery, the camera powers on automatically.
Can I use ND filters with it?
Yes. In fact, RunCam includes a detachable lens protector that can be swapped out for an ND16 filter (often included in the box). Using an ND filter is highly recommended for FPV because it helps eliminate "jello" (vibrations) in your video caused by high-KV motors, giving the footage a natural motion blur.
How do I start and stop recording?
There is a single physical button on the side. A short press starts the recording (indicated by a flashing red LED), and another press stops it. Because it has no WiFi or Bluetooth, you can't change settings via an app; it is a "set it and forget it" camera designed for simplicity.