Many of our partners are verified by the manufacturers

The Walksnail Avatar HD Pro Kit is the high-performance benchmark for the Avatar digital ecosystem. It is specifically engineered for low-light performance and high-frame-rate racing, making it the most versatile "all-rounder" for pilots who fly in both bright daylight and challenging "golden hour" conditions.
Starvis II Technology: The Pro camera uses Sony’s latest Starvis II sensor, which is designed for extreme low-light sensitivity. This means you can keep flying long after the sun goes down, as the camera can "see" in near-darkness better than the human eye.
100fps High Frame Rate: For racers and high-speed freestyle pilots, the kit supports a 100fps mode. This significantly reduces latency and provides a much smoother visual experience in the goggles, helping you react faster to obstacles.
Upgraded V2 VTX: The included V2 transmitter features a 20x20mm and 25.5x25.5mm mounting pattern, making it compatible with almost any modern frame. It also includes an improved power supply circuit that supports up to 6S input voltage.
32GB Onboard Recording: The VTX features built-in storage. You can record your flight in 1080p or 720p directly to the VTX memory. This ensures you have high-quality footage even if your goggles experience signal interference or "bitrate drop."
Canvas Mode Support: Fully supports Betaflight, INAV, and KISS OSD. You get a full text-based OSD exactly like analog, but in high definition.
Technical Specifications:
Camera Sensor: 1/1.8-Inch Sony Starvis II
Resolution: 1080p/60fps, 720p/120fps, 720p/100fps
Aperture: f/1.6
Field of View (FOV): 160°
VTX Storage: 32GB Internal
Input Voltage: 6V - 25.2V (2S-6S)
VTX Power: Up to 1200mW (with unlock)
Antenna: IPEX (U.FL) LHCP
Pilot's Reality Check:
Heat Management: Like all high-power digital VTXs, the Avatar V2 gets very hot on the bench. It is highly recommended to set your "Pit Mode" to active until you are ready to take off, or use a fan while configuring settings.
Camera Size: The Pro camera is "Micro" sized (19x19mm). If you are installing this in a frame designed for "Full Size" or "Mini" cameras, you may need a TPU adapter or 3D-printed spacers.
Flyer's POV: Flying with the Pro kit is a "night and day" difference—literally. During evening sessions when analog or other digital cameras start to show grain and "noise," the Avatar Pro image remains clean and vibrant. The 100fps mode makes the drone feel incredibly connected to your sticks; it’s one of the few digital systems that truly rivals the "feel" of analog for racing.
1 * Avatar HD Pro Camera
1 * Avatar V2 VTX (32GB Version)
1 * Avatar V2 LHCP Antenna
1 * 4-pin Power/Data Cable
4 * M2 x 4mm Screws
4 * M2 x 5mm Screws
4 * M2 x 6mm Screws
4 * M2 x 14mm Screws
4 * M2 Gaskets (1mm)